The Best Way to Store a Milwaukee® M18 FUEL™ Leaf Blower (Battery and All)
A cordless leaf blower is one of the most useful tools in the garage, and one of the most awkward to store. It won't sit flat on a shelf, the nozzle sticks out into the walkway, and the battery makes it heavy on one end. If you own a Milwaukee® M18 FUEL™ leaf blower, a simple wall mount fixes all of that. Here's how to pick the right one and hang your blower in about ten minutes.
Why hang your leaf blower on the wall?
- No more tripping over it. The floor is for walking and parking.
- The nozzle stays safe. Blowers on the floor get stepped on and knocked over.
- It's always ready. Grab it on the way out the door, with the battery already on.
- It frees up shelf space for everything else.
Step 1: Find your model number
M18 FUEL™ blowers come in different body shapes, so the mount has to match. Check the model number on the label on your blower, then pick the mount:
| Your blower | The mount | Size | Screws included |
|---|---|---|---|
| 2724-20 or 2724-21 | Leaf blower wall mount for 2724 | 6¾ × 2¾ × 2¾ in | Two 1⅝ in Torx |
| 3017-20 or 3017-21 | Heavy-duty leaf blower wall mount for 3017 | 7 × 2¾ × 1½ in | Two 1¼ in Torx |
Both are $14.95 and come in red or black.
Step 2: Store it with the battery on
You don't need to pull the battery every time you put the blower away. Both mounts are built to hold the blower's full weight with an M18™ battery attached. Hang it, and it's ready for next time.
Step 3: Install the mount
- Pick the spot. Somewhere near the garage door or your charging station works best.
- Find a stud with a stud finder. A stud gives the strongest hold.
- Check the height. The blower hangs below the mount, so leave room for the nozzle to clear the floor, a workbench or anything stored underneath.
- Drive the two included screws through the mount into the stud.
- Hang the blower. The wide opening means you don't have to line it up perfectly. Just drop it in.
Garage wall ideas
- The outdoor power tool wall: blower, string trimmer power head and QUIK-LOK™ attachments side by side. See our QUIK-LOK storage guide.
- The grab-and-go door: blower right next to the door you use for yard work, so cleanup takes seconds.
- The shed setup: a wall mount keeps the blower off a dirt or damp floor.
- Match or contrast: red mounts match the tool. Black mounts look clean on dark walls and pegboard.
Frequently asked questions
Will the mount hold up in a hot or cold garage?
Yes. It's made from a tough material that resists impact, heat and UV, so it won't crack, fade or warp.
Does the 2724 mount fit the 3017 blower?
No. The two blowers are shaped differently, so each has its own mount. Check your model number first.
Is the blower included?
No, just the wall mount and its screws.
Where are they made?
Both mounts are made in the USA.
Doing a lot of yard work? Carry a spare M18™ battery on your belt so you never have to walk back for one.
Milwaukee®, M18™ and M18 FUEL™ are trademarks of Milwaukee Electric Tool Corporation. Our products are compatible with Milwaukee® tools and are not made, sponsored or endorsed by Milwaukee Electric Tool Corporation.